Speedycom Performance Ltd
MWR Full Race Airfilter  R9 → ’25/’26 , MT09/SP → (gen4) , Tracer 9/GT → ’25/’26 , XSR900GP → ’24/’26 , XSR900 → ’24/’26
SKU MC-090-24R

MWR Full Race Airfilter R9 → ’25/’26 , MT09/SP → (gen4) , Tracer 9/GT → ’25/’26 , XSR900GP → ’24/’26 , XSR900 → ’24/’26

£168.99

1

MWR Full Race Airfilter for :

R9 → ’25/’26

MT09 / SP  →  gen4

Tracer 9 / GT → ’25/’26

XSR900GP → ’24/’26

XSR900 → ’24/’26

No modifications needed

Tip : To increase the power even a bit more you can make a small airbox modification , cut the tubes halfway under a angle of 45 degrees … both on same height … ( see picture )

New for MT09 / Tracer9 / XSR900/XSR900SP are the High Performance Velocity Stacks , two part setup for nice and clean seal-off with airbox , part.nr.: MWR-VS-910

___________________________________________________

The MWR Full Race Airfilter , for track and racebikes .The goal for the revolutionairy design is to reduce the inlet noise and yet more power delivery .

WSBK technology for your own track/racebike :

The aerodynamic plate is designed to create an equal airflow on all three cylinders.
The double plate eliminates the turbulence “behind”the plate , which creates an even higher speed of the air. Due to these changes in the airflow, the cylinders are also better filled so that you have more room to play with the ignition

Unlike all other sportsfilters the “HE’ filter creates a much better , equal airflow over all cylinders , means you need to adapt fueling of all cylinders seperatly to achieve maximum effect of the “HE” filter . Concerns all twins , V-twins , three , four , and V4 engines.

Remapping the ECU or Fuel Control Module is recommended