MWR - MANUAL/USERS GUIDE

MWR - MANUAL/USERS GUIDE

MANUAL MWR AIRFILTERS 

The difference between our road bike filters and race filters 

The foam material of our racing filters have a much more open structure, which makes the protection of a much shorter duration, note: protection is 100% but much shorter, the maintenance frequency is so high that these filters are NOT suitable for road bikes Our road bike  filters have a maintenance frequency of once a year, regardless of the mileage. Stick to this so that the foam cannot dry out and the protection for the next year is 100% insured. In countries around the Equator with extremely high temperatures and extremely high humidity, road engine filters must be serviced at least twice a year. Race bike filters can handle the same maintenance frequency as normal. Only MWR Air filter oil may be used because this oil is biodegradable and therefore also resistant to backfire So …. very simple, the red filters are for the road bikes and black filters are for the track & race bikes Below you can read again the differences between all our filters as described on our website 


The difference between the different type of MWR Airfilters in details 

1)The Performance air filter , excellent performance and max. protection . No copy of the std. filter , always searching for solutions , either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . In countries around the Equator with extremely high temperatures and extremely high humidity, road engine filters must be serviced at least twice a year. Remapping the ECU or the Fuel Control Module is recommended. 

2) The High Efficient air filter : for road & race bikes , designed for inlet noise reduction . The revolutionary High Efficient Air filter is designed to reduce intake noise and yet more power to deliver . This design of air filter has shown a reduction of up to 8db of intake noise compared to other sports filters. Unlike all other sports filter all inlets will get with this High Efficient Air filter the same quantity of air, regardless the speed of the motorcycle or wind directions . No different fuel-mappings between internal & external or front & rear cylinders are needed , this will be achieved by tuning each cylinder separate . Caution : clean and re-oil at least once a year with MWR air filter oil & cleaner . In countries around the Equator with extremely high temperatures and extremely high humidity, road engine filters must be serviced at least twice a year. Remapping the ECU or the Fuel Control Module is highly recommended. 

3) The Full Race air filter , developed on the track , developed for race bikes NOT for road bikes , NOT on a dyno but in real life , bikes with Dataloggers for the ultimate performance due to new materials and design , protection is on the same level as the filters above , only for a shorter time . Unlike any other sports filters all inlets will get with this Full Race air filter the same quantity of air , regardless the speed of the motorcycle , wind directions or the turbulence of the fairing . No different fuel-mappings between internal & external or front & rear cylinders are needed , this will be achieved by tuning each cylinder separate . Caution : The Full Race air filter protects for 100% but for a short period of time , check after each race weekend your filter , use only MWR filter oil & cleaner . Make sure you start each race weekend with a well-oiled filter . This air filter is not developed to reduce the inlet noise . Remapping the ECU or the Fuel Control Module is highly recommended. 

4) WSBK Full Race air filter With the corporation of KHI , BMW , MV Agusta and MotoGP teams we developed a new style , very exclusive customized air filter for track and race bikes , NOT for road bikes , which increases the filter surface enormously . The shape of the filter is "adapted" to the airbox to make it as big as possible , one of the reasons why we can't make the WSBK filter for every bike . We are able to increase the filter surface from 50 - 100% , depending on the type of bike. More & bigger surface means less restriction , a better protection and the performance increase is in this case enormously. All WSBK filters are hand cut hand cut 

and hand glued These new style WSBK filters are build with two different kind of foam materials . One part is foam material used for our road bikes , the rest is the foam material for the full race filters . The road material is placed on a conscious place to create the same effect as the splitter plate on our “HE” & “R” filters. Remapping the ECU or installation of a fuel module is necessary For the fuelling you need to approach the same way as with our "HE" & "R" filters . This means tune each cylinder separate and secondary injectors separate from the main injectors. Caution : The Full Race air filter protects for 100% but for a short period of time , check after each race weekend your filter , use only MWR filter oil & cleaner . Make sure you start each race weekend with a well oiled filter. 


Guidelines for maintainance of the MWR Airfilters 

The MWR road bike filters have a maintenance frequency of once a year, regardless of the mileage. Stick to this so that the foam cannot dry out and the protection for the next year is 100% insured. 

In countries around the Equator with extremely high temperatures and extremely high humidity, road engine filters must be serviced at least twice a year. Race bike filters can handle the same maintenance frequency as normal. Only MWR Air filter oil may be used because this oil is biodegradable and therefore also resistant to backfire 

How the clean & oil the MWR filters

1) If needed , remove the plate from the filter and immerse the filter in MWR air filter cleaner for 30 minutes. 

2) Wash the filter in hot water with dishwashing soap 

3) Rinse the filter well with water 

4) When the filter is completely dry, spray the filter with MWR air filter oil on both sides (filters with aluminium frames) . Immediately afterwards massage with both hands . Filters, which you can disconnect from the filter cage, immerse in the filter oil and then squeeze the oil out, never wring the filters. 

5) Only MWR Airfilter oil may be used because this oil is biodegradable and therefore also resistant to backfire 


Storage of the MWR air filter by Dealers & Distributors 

Filters should be laid flat and they should not be stacked on top of each other , in a cool room where it does not get too hot, will it be too hot please install air conditioning 

Countries around the Equator with extremely high temperatures and extremely high humidity must store the filters in a dark room with air conditioning , no longer than one year , keep this in mind that you do not put too many filters in stock 

Wilco v. Zutphen 

MWR AIRFILTERS 


Drop items here to shop
Product has been added to your cart

Oops, no products have been added to this category yet.

Go back to the Home page