Speedycom Performance Ltd
Stand Alone Blipper Shifter (SABS) For Aprilia

Stand Alone Blipper Shifter (SABS) For Aprilia

£500.00choose options for price (from £500.00)

HM Quickshifter Stand Alone Blipper Shifter (SABS) Clutchless up and down shifts for any ride-by-wire bike — engineered to be ultra-safe. The SABS adds full clutchless shifting — up the box and back down — to any modern ride-by-wire motorcycle, wheth

1

HM Quickshifter Stand Alone Blipper Shifter (SABS)


Clutchless up and down shifts for any ride-by-wire bike — engineered to be ultra-safe.

The SABS adds full clutchless shifting — up the box and back down — to any modern ride-by-wire motorcycle, whether or not it already has a shifter or blipper of its own. Your unit arrives already set up for your bike, so there's no dyno time, no tuner appointment and no starting from scratch.

Underneath the simplicity is fifteen years of HM race know-how, running the calculations in real time to deliver a perfect shift and a perfectly matched blip, every time.


Safety, engineered like an aircraft


Because the SABS sits within your throttle circuit, we designed it from the ground up to the same failsafe philosophy used for the primary flight controls of commercial aircraft.

In normal riding it is physically disconnected from your throttle — a direct connection runs between your sensor and the ECU, exactly as if the system weren't fitted. When you ask for a shift, the SABS runs a full systems test in under a millisecond. Only if every single test passes does it step into the circuit, complete the shift, and step back out again. If anything is wrong at any point, it instantly removes itself, logs the fault, and stops operating until you've put it right — and your bike keeps running safely throughout.

Uncommanded throttle input is designed to be impossible. No other system on the market can make that claim.


Key features


  • Adds shift and backshift to any ride-by-wire bike, even one with an existing system
  • One simple connection — plugs inline with your accelerator position sensor
  • Supplied pre-configured for your bike, so it's right from the start
  • No dyno setup required
  • RPM and gear-by-gear programming for perfect shifts in any condition (Pro)
  • Automatic, intelligent warm-up that gently brings the bike to temperature (Pro)
  • Pit lane limiter and launch control (Pro)
  • Fully adjustable from your laptop using our free software
  • Full 1-year warranty and UK technical support


Fitting


If you're confident changing the spark plugs on your own bike, you're capable of fitting the SABS. It's a single connection: the unit plugs inline with your accelerator position sensor (APS) — the one that reads your grip position, never the throttle body sensor. Many bikes use the same connector for both, so check carefully or ask us first.

Once it's fitted, connect the unit to a Windows laptop and run our free software to calibrate the throttle. It's a quick, one-time step that tailors the system to your bike — and it's the same software you'll use later if you ever want to adjust your settings.


What you'll need


Your SABS comes with the control module, sensor, PC interface lead and grub screws. Shift rods and rose joints are not supplied — your shift rod needs to be 55mm shorter than your original, so measure the rod only, not including the grub screws or rose joints, and subtract 55mm. We can supply one in the right length, and a universal shift rod kit is also available.


Not sure how it fits?

Read the guide and watch the fitting video before you order: Fitting guides & videos


Not sure yours is covered?

Can't see yours? Send your bike details to sales@hmquickshifter.com or WhatsApp +44 1795 429168

we'll confirm the right unit before you order.