
HM Rose Joints
£8.50choose options for price (from £8.50)
The rose joint is the pivoting rod end. It's what lets the linkage move freely through its travel — and it's the part that wears. Once there's play in the joint, some of your shift movement gets lost in the slop instead of reaching the sensor. Availa
- Fitment question? Call 01298 816633
- Postage is confirmed by email unless stated. Shipping info
The rose joint is the pivoting rod end. It's what lets the linkage move freely through its travel — and it's the part that wears. Once there's play in the joint, some of your shift movement gets lost in the slop instead of reaching the sensor.
Available in both left hand and right hand M6 male thread.
Is mine worn?
Worth checking before you suspect anything else. With the engine off, take hold of the linkage and feel for any rocking or rattle in the joint itself. A healthy joint pivots smoothly with no free play. A worn one has a little movement you can feel — and that movement is shift travel your sensor never sees.
Symptoms of a worn joint:
- Shifts that feel vague or inconsistent compared to when it was new
- The occasional missed shift that you can't pin down
- A faint knock or rattle from the linkage
- Shifter that needs a firmer prod than it used to
If any of that sounds familiar, a rose joint is a very cheap thing to rule out before you start suspecting the electronics.
A note on left and right hand Order the same hand as the joint you're replacing. If you're running one of each — left one end, right the other — you can adjust the linkage length by simply turning the rod, without undoing either end.
Specification
- Thread: M6 male
- Available in left hand and right hand thread
- Left hand threads tighten anti-clockwise
Replacement part. Choose the hand you need from the options below.
