Speedycom Performance Ltd
M6 Left/Right hand Grub Screws

M6 Left/Right hand Grub Screws

£0.50choose options for price (from £0.50)

The grub screw is the M6 threaded stud that connects your HM quickshifter to the shift rod. Both the shifter and the rod are dual threaded, so they'll take either hand — left or right will thread straight in. Running one left hand and one right hand

1

The grub screw is the M6 threaded stud that connects your HM quickshifter to the shift rod. Both the shifter and the rod are dual threaded, so they'll take either hand — left or right will thread straight in.

Running one left hand and one right hand is the trick worth knowing: with opposing threads at each end, you can adjust the linkage length by simply turning the rod, without undoing either end.


These come with every HM kit — so why buy them?


  • Spares — small parts go missing, get dropped in the gravel, or seize in over the years
  • Moving your shifter to another bike — leave the hardware on the old bike and start fresh on the new one
  • Bought a used shifter — second-hand units often turn up missing the small bits
  • Setting up for adjustment — grab one left and one right so the rod adjusts by turning

Supplied with lock nut. Choose the hand you need from the options below.


Specification


  • Thread: M6
  • Available in left hand and right hand thread
  • Connects HM quickshifter to shift rod — both are dual threaded, so either hand will fit
  • Supplied with lock nut
  • Left hand threads tighten anti-clockwise

Included as standard with HM quickshifter kits. Sold here individually as spares.