
G2 Trials Tamer Throttle Tube for Beta- Progressive Rate
£79.99choose options for price (from £79.99)
G2 Trials Tamer Throttle Tube for Beta offers better control! Perfect for off-idle maneuvers providing comfortable rotation and precise control! Check it out!
- Fitment question? Call 01298 816633
- Postage is confirmed by email unless stated. Shipping info
G2 Trials Tamer Throttle tube for Beta
The G2 Trials Tamer Throttle tube for Beta provides increased control where needed off idle, then ramps up to keep overall rotation at a comfortable range.
<h3How?/h3> The initial rate is same as the Domino BLACK Trials Throttle Tube, which provides great control. However, the BLACK throttle tube requires far too much turn to reach wide open. By increasing the rate at mid-throttle, rotation is nearly same as the WHITE throttle tube, but with the increased control where you need it!. It’s the perfect compromise between the two!
For those wanting quicker response, check out the G2 Rapido Trials Throttle tube for Beta.
The throttle tube consists of the smooth G2 tube with Delrin inserts. The cam (or “pulley”) end is the same rate as the Domino WHITE (Fast) plastic throttle tube.
Are Delrin bushings better than ball bearings?
Conventional ball bearing equipped throttle tubes seem like a great idea. Once installed and you’re twisting the throttle (with the bike on a stand and the engine off) it sure feels sweet! But give it a “real world test”. While you’re sitting on the bike, apply a bit of downward pressure on the grip as you turn. You will immediately feel the aluminum tube contact the handlebar.
With G2 Throttles, the Delrin bushings prevent this completely! Push down all you want! In addition, ball bearings require constant maintenance (unlike our ball bearing solution called the Jimmy Twister), or the bearing will corrode and ultimately seize. Not so with our Delrin bushing equipped throttle tubes!
In addition, the G2 Trials Tamer Throttle tube for Beta (like all G2 throttle tubes) includes a Delrin Friction Plate, which looks like a thin, black washer. This is installed onto the handlebar before the throttle tube and inside of the throttle housing. This stops aluminum-on-aluminum contact for a smooth, precise feel even while pushing inward!
Using handguards or bar ends? No problem with the G2 Trials Tamer Throttle tube for Beta! The end cap is removeable (see above pic) and allows easy handguard installation. The knurled area provides solid grip adhesion. Just install a good quality grip (we highly recommend Domino Grips) and you’re good to go!
G2 Trials Tamer Throttle tube for Beta Highlights
- CNC Machined, polished and anodized 6061 aluminum!
- Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel.
- Fits the stock Beta throttle housing and cables.
- Slide one of our Domino Grips (sold separately) or your grip unto the G2 Throttle Tube.
- Durable aluminum lasts far longer than plastic tubes.
- Removable end cap eliminates the need to cut the end of the throttle tube when using dirt bike bar ends or handguards
- For the smoothest throttle action possible, try adding our Jimmy Twister Throttle Bearing!
- Installs in minutes!
Jimmy Twister is not compatible with full-wrap handguards.
