Speedycom Performance Ltd
G2 “Stock Ratio” Throttle Tube For Honda
SKU g2-stock-honda

G2 “Stock Ratio” Throttle Tube For Honda

£79.99choose options for price (from £79.99)

Stock Ratio! Replace your stock Honda plastic throttle tube with USA-machined aluminum and Delrin bushings.

1

G2 Aluminum Throttle Tube for Honda

Replace your stock Honda plastic throttle tube with the G2 Aluminum Throttle Tube for Honda. Not only will you enjoy the ultra smooth throttle action of the Delrin bushings, you can also easily replace your motorcycle grips in the future.
G2 Throttle Tubes are machined in the USA from 6061 aluminum. The “grip” area has an internal knurl pattern to provide an adhesion surface without increasing the grip area dimension (and a bulky grip feel). The tube is then polished for a superior finish before anodized our standard “G2 Red” that looks great on Honda dirt bikes!

Are Delrin bushings better than ball bearings?

Standard ball bearing throttle tubes seem like a great idea. Once installed and you’re twisting the throttle (with the bike on a stand and the engine off) it sure feels sweet! But give it a “real world test”. While you’re sitting on the bike, apply a bit of downward pressure on the grip as you turn. You will immediately feel the aluminum tube contact the handlebar.

With the G2 Aluminum Throttle Tube for Honda dirt bikes, the Delrin bushings prevent this completely! Push down all you want! In addition, ball bearings require constant maintenance (unlike our ball bearing solution called the Jimmy Twister), or the bearing will corrode and ultimately seize. Not so with our Delrin bushing equipped throttle tubes!

In addition, all G2 throttle tubes include a Delrin Friction Plate, which looks like a thin, black washer. This is installed onto the handlebar before the throttle tube and inside of the throttle housing. This stops aluminum-on-aluminum contact for a smooth, precise feel even while pushing inward!

Using handguards? No problem with the G2 Aluminum Throttle Tube for Honda! The end cap is removeable (see above pic) and allows easy handguard installation. The knurled area provides solid grip adhesion. Just install a good quality grip (we highly recommend Domino Grips) and you’re good to go!
tubes!

G2 Aluminum Throttle Tube for Honda Highlights

    • Machined from 6061 aluminum in the USA!
    • Self-lubricating Delrin bushings at each end of eliminate aluminum-to-aluminum contact and provide a smooth feel.
    • Fits inside the stock Honda throttle housing to stock cables.
    • Makes replacing your motorcycle grips a cinch. Slide one of our Domino grips or your grip onto the throttle tube.
    • Removable end cap eliminates the need to cut off the end when using dirt bike handguards
    • Installs in minutes!

Jimmy Twister is not compatible with full-wrap handguards.