
Pro Sky Lift Package
£765.00
- Fitment question? Call 01298 816633
- Postage is confirmed by email unless stated. Shipping info
This package combines the Sky Lift, Technician's kit and a common range of Bobbin and Hub adapters, so the Sky Lift can be used in a workshop on over 450+ different motorcycles.
The Sky Lift is a motorcycle work bench and stand all in one... You will not be restricted when working under a motorcycle as you would with a workbench, both wheels can (individually) be raised higher off the ground than most standard bench's and above all else you can push the bike around freely whilst elevated anywhere in your workshop. When not in use, the lift takes up a fraction of the space of a conventional bench.
No other stand, lift, jack or bench will enable more work to be carried out on a motorcycle than the abba Sky Lift. You can remove the fairings, wheels, forks, shock, engine and even the swing arm with our Swing arm Removal kit. In fact, every last nut bolt and washer can be dismantled down to leaving the bare frame attached to the lift.
- NEW - Now supplied with our 3rd generation hydraulic ram. The new internals of our latest ram, combined with the foot pedal operation, mean the lifting speed is around 40% faster than shown in some of our original videos. It now only takes around 35 seconds to lift to max height!
This package contains:
abba Sky Lift - Full product details here.
abba Technicians Kit - Full product details here.
abba Bobbin & Hub adapters - Full product details here. 6mm, 8mm, 10mm bobbin adapters supplied as well as five hub spindles suitable for most common Triumph, Honda and Ducati single sided swing arm motorcycles.
Package savings:
These products usually retail at £757.55 if bought separately. So you save £42.55 with this package.
Related Links:
Sky Lift Gallery - See many photos of different motorcycles on the Sky Lift, photos provided from previous customers.
Fitting Application - If you need more detailed information on where the Sky Lift fits your bike, or how our fitting kits work, you should find it here.
Product instructions - Can be found on this page.
To see a full list of bikes/motorcycles that can be used with the Technician's Kit, please click here.
EU Design Registration No. 002569491
Key Features of the pro sky lift package at a Glance
- No modifications or parts to be permanently fitted, just select the correct fittings from the technicians kit and your ready to lift the particular bike.
- One person, quick and simple operation.
- The bike stays very safe and secure, the Sky Lift locks to both sides of the swing-arm pivot for maximum security.
- The wheels, forks, yokes, shock & engine can all be removed, in fact everything down to the bare frame! Even the swing-arm can be removed with our Swing Arm Removal Kit.
- Off loads suspension front and rear unlike conventional paddock stands.
- The bike can be locked off at maximum height and a secondary lower position for additional safety. (No load on hydraulic pump).
- Takes up considerably less space and allows far more access than a workbench/table.
- Allows you to reach virtually every component on a motorcycle at a comfortable working height.
- Fully maneuverable, push your bike into the corner of the garage and wheel back out when work needs to be done!
- The Technicians kit now has 50 separate fittings to adapt the Sky Lift to fit over 450+ models of motorcycle. Fits motorbikes from the early 1980's through to brand new current models!
EU Design Registration No. 002569491
