| The
MemJet Module is simple to install and tune. It has Plug ‘n Play
connectors that exactly match the OEM connectors on the subject
application. It affords a simple, economical and efficient way to tune
effectively without any expensive dyno-tuning needed. The MemJet
Adjustable Module acts directly on the IAT sensor’s values. The IAT is
one of the most important sensors that the ECU polls to call up the
proper on-board Fuel Injection and Ignition mapping.
The
MemJet Module sends a colder/denser air value to the ECU through the
IAT port; the ECU will then call up on-board mapping that will be more
aggressive. The ECU will establish a new series of necessary changes to
the Injection and Ignition mapping through an established algorithm
within the ECU.
When
you increase the value on the MemJet dial you will progressively dial
up more aggressive mapping. To find the best “Performance Mapping” for
your application take a 5 -10 mile adjustment ride – Slowly increase
the values on the MemJet Module dial until you find the perfect setting
for excellent engine response at all RPMs. This will be the
“Performance Setting” that will produce the most overall power
throughout the entire RPM range.
As
a by-product of more power, the low end jerky throttle, lackluster
mid-range and high RPM issues are completely resolved! The engine will
be smoother, more powerful and it will run cooler due to better
mapping. For this reason the MemJet Module will be of benefit to both
stock and highly modified applications with or without catalytic
converter! The Adjustable MemJet Module can be re-tuned as you further
modify your application.
Do
not confuse the MemJet Module as an ADD Fuel ONLY Device. The MemJet
Module just empowers the stock ECU to call-up the best on-board
Injection and Ignition mapping for your stock or modified engine’s
needs. The MemJet Module installation is completely reversible and your
motorcycle can be restored to it’s original ECU settings in just a few
minutes by removing the MemJet Module.
THE
MEMJET EVO ADJUSTABLE PERFORMANCE MODULE IS DESIGNED TO IMPROVE THE
PERFORMANCE OF FUEL INJECTED MOTORCYCLES. The MEMJET Adjustable
Performance Module has been engineered through years of research and
development on the Dynamometer, Off-Road Enduros, Road Racing Bikes and
FIM Land Speed Record Bikes.
Our goal was to offer the enthusiast a simple to install power maker
that would offer the end-user an adjustable inexpensive tuning device. |
